Dash Cam Installation in Chilliwack
Front, rear and parking-mode dash cam installation at our Chilliwack shop — hardwired, hidden wiring, and set up properly so it's recording when you need it.
Certified techs · Hardwired parking mode · Clean hidden wiring
A dash cam is cheap insurance — until you find out it wasn't recording, or the cigarette-lighter cable is dangling across your dash. We install dash cams the clean way: hardwired into your fuse box, wiring tucked completely out of sight, and parking mode set up so it keeps an eye on your vehicle even when it's parked. Front-only, front-and-rear, we set it up right.
What we install
- Front & rear dash cams Single or dual-channel systems installed and configured.
- Hardwire kits Clean fuse-box hardwiring instead of a dangling 12V cable.
- Parking mode Impact and motion recording set up with safe battery cut-off.
- Hidden wiring Cables tucked up the A-pillar and headliner — nothing on show.
- Backup cameras Add a proper backup camera with the same tidy install.
How it works
-
6
Free consultationWe confirm your vehicle and which camera setup you want.
-
7
Up-front quoteSingle vs dual channel and hardwire/parking kit priced before we start.
-
8
Clean installHardwired into the fuse box, wiring hidden, parking mode set.
-
9
Test & walkthroughWe confirm recording, format your card, and show you the app.
Pricing
Dash cam installs are quoted up front — single vs. dual channel and hardwire/parking-mode kits affect the price. Free consultation.
Hardwired and hidden — the way a dash cam should be installed
Most people plug a dash cam into the 12V socket and live with a cable across the windshield. We do it properly: a hardwire kit tapped cleanly into your fuse box, the camera wired up the A-pillar and along the headliner so nothing shows, and the system tested before you leave.
Parking mode that actually protects your car
With a hardwire kit, your dash cam can keep recording (or watch for impacts) while you're parked — useful for hit-and-runs in parking lots. We set the cut-off properly so it protects your car without draining the battery.
Front, rear, and backup cameras too
Want a rear channel to catch what happens behind you, or a proper backup camera while we're in there? We install dual-channel dash systems and backup cameras with the same clean, hidden wiring.
Worth the drive
Customers bring their vehicles to our Chilliwack shop from Abbotsford, Mission, Langley, Surrey and across Greater Vancouver for a tidy, reliable dash cam install. Bring your own camera or pick one up from us.
Dash cam installation — common questions
How much does dash cam installation cost in Chilliwack?
It depends on single vs. dual channel and whether you want a hardwire kit with parking mode. We quote the installed price up front after a free consultation; bring-your-own-camera installs start at our $74.99 per 30-minute rate.
What is a hardwired dash cam and do I need parking mode?
Hardwiring taps the dash cam into your fuse box instead of the 12V socket, which removes the dangling cable and enables parking mode — recording or impact detection while you're parked. It's the cleanest, most reliable way to run a dash cam.
Can you install front and rear cameras?
Yes. We install dual-channel systems with a rear camera, running the wiring hidden along the headliner so nothing is visible.
Will the wiring be hidden?
Yes — we tuck the cabling up the A-pillar and along the headliner so the only thing you see is the camera itself.
Will a hardwired dash cam drain my battery?
No, when it's set up correctly. We configure a safe voltage cut-off so parking mode protects your car without leaving you with a dead battery.
Can I bring my own dash cam to install?
Absolutely. We install customer-supplied dash cams at our bring-your-own-gear rate, hardwired and hidden, and set up the app before you leave.
Book your dash cam install in Chilliwack
Tell us your vehicle and whether you want front-only or front-and-rear with parking mode. We'll quote it up front — free, no pressure.