2013–2019 Nissan Sentra Car Stereo, Speaker & Dash Kit Fitment
The 2013–2019 Nissan Sentra has a factory single-DIN stereo that accepts a single- or double-DIN aftermarket head unit using a Metra dash kit, with steering-wheel controls kept through a plug-and-play harness. Front doors are 6-3/4", the rear deck is 6×9", and top Bose trims run a factory amp.
2013–2019 Nissan Sentra fitment at a glance
| Factory stereo / aftermarket fit | Factory single-DIN — accepts a single- or double-DIN aftermarket stereo with a Metra dash kit |
|---|---|
| Front speaker size | 6-3/4" (front doors) |
| Rear speaker size | 6×9" (rear deck) · Bose cars add 6-3/4" rear-door speakers |
| Factory amplifier | Top Bose 8-speaker system uses a factory amp — keep it with an amp-retention harness; base 4- and 6-speaker systems are unamplified |
| Steering-wheel controls | Yes — retained with a plug-and-play harness |
| Typical install time | 1–2 hours |
| DIY difficulty | Intermediate DIY (or installed at our Chilliwack shop) |
Front doors are 6-3/4" (these drop in with a 6.5" speaker plus a Nissan mounting bracket). Rear-deck 6×9"s are low-impedance from the factory, so swapping to standard 4-ohm speakers can shift your volume balance — ask us and we'll match it. Bose-equipped cars run a factory amp and add 6-3/4" rear-door speakers; confirm your trim if you're unsure.
The B17 Nissan Sentra is a clean, beginner-friendly upgrade. The factory opening is single-DIN, but the right Metra kit lets you drop in a modern single- or double-DIN screen with Apple CarPlay or Android Auto — no dash cutting. The catch worth knowing: the rear-deck 6×9"s are low-impedance from the factory and the top Bose trim runs an amp, so the harness you pick matters. Below are the exact dash kits and plug-and-play harnesses we stock for your Sentra. Want it done right the first time? Our techs install Sentras at our Chilliwack shop.
The exact parts that fit your Nissan Sentra
These are the dash kits and wiring harnesses we stock for the 2013–2019 Nissan Sentra. Pair any with a head unit below — it’s plug-and-play, no cutting.
Dash Kits (turns the dash opening into a single/double-DIN slot)
Wiring Harnesses (plug-and-play — no soldering)
Vehicle-Specific Accessories
Now pick your upgrade
Apple CarPlay / Android Auto receivers that drop into the dash kit above.
Shop head units →Upgrade the factory speakers while the door panels are off — biggest sound-per-dollar.
Shop speakers →Add real low-end. We’ll point you to a sub + amp that fits the Nissan Sentra.
Shop bass →Don’t want to DIY? We install it.
Order the kit online, or have our certified techs install your Nissan Sentra stereo, speakers or sound system at our Chilliwack shop. Drivers come in from across the Fraser Valley & Greater Vancouver.
2013–2019 Nissan Sentra stereo upgrade — FAQ
What size speakers fit a 2013–2019 Nissan Sentra?
The front doors use 6-3/4" speakers, which drop in with a common 6.5" aftermarket speaker plus a Nissan mounting bracket. The rear deck takes 6×9" speakers. Cars with the Bose system add 6-3/4" speakers in the rear doors. One heads-up: the factory rear-deck 6×9"s are low-impedance, so swapping to standard 4-ohm speakers can shift your volume balance — we'll match it for you.
Can I put a double DIN / Apple CarPlay stereo in my Sentra?
Yes. The factory opening is single-DIN, but with the Metra 99-7422 dash kit a 2013–2019 Sentra takes a full double-DIN CarPlay / Android Auto receiver cleanly — no cutting. The kit fills the dash opening and gives the new stereo an OEM-style finish. Prefer a smaller deck? The single-DIN 99-7618G kit covers that.
Will I lose steering-wheel controls or the backup camera?
No. A plug-and-play harness keeps your steering-wheel controls working — the iDatalink HRN-HRR-NI1 Maestro harness retains the controls and factory features, and a compatible head unit keeps the backup camera (where equipped). On Bose cars with a factory amp, use the Metra 70-7554 amplified harness so you keep full sound.
What dash kit do I need for a (2013–2019) Sentra?
For a double-DIN stereo, the Metra 99-7422 single/double-DIN kit is the one to get. For a compact single-DIN stereo, the Metra 99-7618G in grey is an OEM-match option. Both are in stock above with live pricing, and both fit the 2013–2019 Sentra.
Can Audiomotivez install it?
Absolutely. We install Nissan Sentras at our Chilliwack shop, with customers driving in from across the Fraser Valley — Abbotsford, Mission, Langley and Greater Vancouver. Order the kit online for a DIY install, or book an install with us — call 604-792-4070.