2018–2024 Toyota Camry Car Stereo, Speaker & Dash Kit Fitment
A 2018–2024 Toyota Camry takes a single- or double-DIN aftermarket stereo using a Metra dash kit on trims with a separate (manual) climate bezel, with steering-wheel controls retained via a plug-and-play Toyota '18-up harness. Front speakers are 6.5" (some 6.75"); the sedan rear deck uses 6×9".
2018–2024 Toyota Camry fitment at a glance
| Factory stereo / aftermarket fit | Single or Double DIN with a Metra dash kit — on trims with a separate/manual climate bezel |
|---|---|
| Front speaker size | 6.5" (some trims 6.75") |
| Rear speaker size | 6×9" in the rear deck (sedan) |
| Factory amplifier | Premium JBL trims add a factory amp + subwoofer — keep it with an amp-retention interface |
| Steering-wheel controls | Yes — steering-wheel controls are retained with a plug-and-play harness |
| Typical install time | 1–2 hours for a head-unit + dash kit |
| DIY difficulty | Intermediate DIY (or installed at our Chilliwack shop) |
The clean single-/double-DIN swap applies to Camry trims with a separate (manual) climate-control bezel — that's what the Metra 99-8266BLHG kit is built for. Higher trims with the large integrated touchscreen (climate controls built into the screen) are harder and may need a screen-specific solution. Front speakers are 6.5" on most trims (some are 6.75"), and the sedan rear deck takes 6×9". Not 100% sure which dash you have? Send us a photo or call — we'll match it in a minute.
Upgrading a 2018–2024 Camry isn't quite as plug-and-play as older Toyotas, so it pays to match the right kit to your exact dash. Cars with a separate (manual) climate-control bezel take a clean single- or double-DIN aftermarket stereo using the Metra 99-8266BLHG kit — drop in Apple CarPlay or Android Auto and keep your steering-wheel controls through a plug-and-play harness. Trims with the big integrated touchscreen need a different approach, so check with us first. Below are the exact dash kits, harnesses and rear-deck speaker adapters we stock for the Camry — or have our certified techs do it for you in Chilliwack.
The exact parts that fit your Toyota Camry
These are the dash kits and wiring harnesses we stock for the 2018–2024 Toyota Camry. Pair any with a head unit below — it’s plug-and-play, no cutting.
Dash Kits (turns the dash opening into a single/double-DIN slot)
Wiring Harnesses (plug-and-play — no soldering)
Vehicle-Specific Accessories
Now pick your upgrade
Apple CarPlay / Android Auto receivers that drop into the dash kit above.
Shop head units →Upgrade the factory speakers while the door panels are off — biggest sound-per-dollar.
Shop speakers →Add real low-end. We’ll point you to a sub + amp that fits the Toyota Camry.
Shop bass →Don’t want to DIY? We install it.
Order the kit online, or have our certified techs install your Toyota Camry stereo, speakers or sound system at our Chilliwack shop. Drivers come in from across the Fraser Valley & Greater Vancouver.
2018–2024 Toyota Camry stereo upgrade — FAQ
What size speakers fit a 2018–2024 Toyota Camry?
The front doors take 6.5" speakers on most trims (some run a 6.75"), and the sedan rear deck takes 6×9". We stock Camry-specific Metra rear-deck adapters (82-8149) so 6×9" speakers drop straight into the factory openings. If you're not sure of your exact trim, send us a quick photo and we'll confirm the sizes for you.
Can I put a double DIN / Apple CarPlay stereo in my Camry?
Yes — on Camry trims with a separate (manual) climate-control bezel. With the Metra 99-8266BLHG dash kit you can fit a single- or double-DIN Apple CarPlay / Android Auto receiver cleanly. Trims that use the large integrated touchscreen (with the climate controls built into the screen) are harder to replace and may need a screen-specific solution — message us your dash and we'll tell you exactly what works.
Will I lose my steering-wheel controls or backup camera?
No. A plug-and-play Toyota '18-up harness (Metra 71-1765 or 70-1765) keeps your steering-wheel controls working, and a compatible head unit retains the factory backup camera. On premium JBL trims with a factory amp and subwoofer, we add an amp-retention interface so you keep full sound.
What dash kit do I need for a (2018–2024) Camry?
For an '18–up Camry with a separate climate bezel, the Metra 99-8266BLHG is the year-correct kit and gives an OEM-style finish. The 99-8232B ('12-up) and 99-8249 ('15-up) are alternate single-/double-DIN options. All three are in stock above with live pricing — when in doubt, confirm your dash style with us before you order.
Can Audiomotivez install it for me?
Absolutely. We install Toyota Camrys at our Chilliwack shop, with customers driving in from across the Fraser Valley — Abbotsford, Mission, Langley and Greater Vancouver. Order the kit online for DIY, or book an install — call 604-792-4070 and we'll confirm the exact parts for your trim.