2014–2019 Toyota Corolla Car Stereo, Speaker & Dash Kit Fitment
A 2014–2019 Toyota Corolla takes a single- or double-DIN aftermarket stereo using a Metra dash kit, with steering-wheel controls retained through a plug-and-play harness. Factory speakers are 6.5" in the front doors (with 1" sail-panel tweeters) and 6×9" on the rear deck. JBL/Entune trims add a factory amp.
2014–2019 Toyota Corolla fitment at a glance
| Factory stereo / aftermarket fit | Single or Double DIN with a Metra dash kit (factory radio bezel replaced) |
|---|---|
| Front speaker size | 6.5" (front doors) + 1" tweeters in the sail panels |
| Rear speaker size | 6×9" (rear deck) |
| Factory amplifier | Base systems have no separate amp; optional JBL/Entune premium trims use a factory amp/DSP — keep it with an amp-retention interface |
| Steering-wheel controls | Yes — steering-wheel controls are retained with a plug-and-play harness |
| Typical install time | 1–2 hours for a head-unit + dash kit |
| DIY difficulty | Intermediate DIY (or installed at our Chilliwack shop) |
Sizes are for the common 2014–2019 sedan layout: 6.5" front-door woofers with 1" sail-panel tweeters and 6×9" rear-deck speakers. Premium JBL/Entune trims run a factory amp/DSP — replacing the radio on those needs an amp-retention interface to keep volume and tone control. If you're unsure of your trim, send us your VIN and we'll match it exactly.
The 2014–2019 Toyota Corolla is a clean, beginner-friendly stereo upgrade. The factory radio drops out and a Metra dash kit gives you a tidy single- or double-DIN opening, so you can fit a modern Apple CarPlay or Android Auto receiver without cutting the dash. Below are the exact Corolla dash kits we stock with live pricing — pick the finish you want, pair it with a head unit, and you're set. Got the JBL/Entune premium system? We'll add an amp-retention interface so you keep full sound. Want it done right the first time? Our techs install Corollas regularly at our Chilliwack shop.
The exact parts that fit your Toyota Corolla
These are the dash kits and wiring harnesses we stock for the 2014–2019 Toyota Corolla. Pair any with a head unit below — it’s plug-and-play, no cutting.
Dash Kits (turns the dash opening into a single/double-DIN slot)
Now pick your upgrade
Apple CarPlay / Android Auto receivers that drop into the dash kit above.
Shop head units →Upgrade the factory speakers while the door panels are off — biggest sound-per-dollar.
Shop speakers →Add real low-end. We’ll point you to a sub + amp that fits the Toyota Corolla.
Shop bass →Don’t want to DIY? We install it.
Order the kit online, or have our certified techs install your Toyota Corolla stereo, speakers or sound system at our Chilliwack shop. Drivers come in from across the Fraser Valley & Greater Vancouver.
2014–2019 Toyota Corolla stereo upgrade — FAQ
What size speakers fit a 2014–2019 Toyota Corolla?
On the common 2014–2019 sedan, the front doors take 6.5" woofers, with 1" tweeters mounted in the front sail panels. The rear deck uses 6×9" speakers. Sizes can vary slightly by trim and audio package, so if you're upgrading the JBL/Entune premium system, check with us first — we'll confirm the exact fit and include any mounting brackets you need.
Can I put a double DIN / Apple CarPlay stereo in my Corolla?
Yes. With the Metra 95-8245CHG (high-gloss charcoal) or 95-8223 dash kit, a 2014–2019 Corolla accepts a full double-DIN Apple CarPlay / Android Auto receiver cleanly. The kit replaces the factory radio bezel and gives the new stereo an OEM-style finish — no cutting the dash.
Will I lose my steering-wheel controls or backup camera?
No. A plug-and-play harness keeps your steering-wheel controls working, and a compatible head unit retains the factory backup camera on trims that have one. If your Corolla has the JBL / Entune premium system with a factory amp/DSP, we add an amp-retention interface so you keep full volume and tone control. Not sure which system you have? Send us your VIN.
What dash kit do I need for a 2014–2019 Corolla?
For a double-DIN stereo, the Metra 95-8245CHG (exact '14-up, high-gloss charcoal) is the go-to, with the 95-8223 as a value black option and the 95-8223S in silver. For a single-DIN stereo, use the 99-8245CHG. All are in stock above with live pricing.
Can Audiomotivez install it for me?
Absolutely. We install Toyota Corollas regularly at our Chilliwack shop, with customers driving in from across the Fraser Valley — Abbotsford, Mission, Langley and Greater Vancouver. Order the kit online for a DIY install, or book a professional install — call 604-792-4070.