2016–2023 Toyota Tacoma Car Stereo, Speaker & Dash Kit Fitment
A 2016–2023 Toyota Tacoma (3rd gen) takes a single- or double-DIN aftermarket stereo using a Metra dash kit, with steering-wheel controls retained through a plug-and-play harness. Front-door speakers are commonly 6×9" and rear-door speakers 6.5" on Double Cab models — confirm your cab and trim with us.
2016–2023 Toyota Tacoma fitment at a glance
| Factory stereo / aftermarket fit | Single or Double DIN with a Metra dash kit (factory Entune touchscreen replaced) |
|---|---|
| Front speaker size | 6×9" (front doors) |
| Rear speaker size | 6.5" (Double Cab rear doors) |
| Factory amplifier | JBL / Entune Premium trims use a factory amplifier — keep it with an amp-retention interface |
| Steering-wheel controls | Yes — steering-wheel controls are retained with a plug-and-play harness |
| Typical install time | 1–2 hours for a head-unit + dash kit |
| DIY difficulty | Intermediate DIY (or installed at our Chilliwack shop) |
Speaker sizes vary by cab and audio package. Most 3rd-gen Tacomas run 6×9" in the front doors and 6.5" in the rear doors on the Double Cab; Access Cab trucks have smaller fill speakers behind the seats instead of true rear doors, and some front doors need a 6.5" adapter. JBL/Entune Premium trucks add an amp and dash tweeters. Tell us your exact cab and trim and we'll match it — confirm with us if you're unsure.
The 3rd-generation Toyota Tacoma is a great truck to upgrade — the factory Entune touchscreen is dated, but the dash takes a clean single- or double-DIN aftermarket stereo with the right Metra kit, so you can add Apple CarPlay or Android Auto without hacking up the dash. Below are the exact Tacoma dash kits and plug-and-play Toyota harnesses we stock, including a JBL-friendly iDatalink option that keeps your steering-wheel controls and backup camera. Pick one, add a head unit, and you're set — or have our certified techs do it for you at our Chilliwack shop.
The exact parts that fit your Toyota Tacoma
These are the dash kits and wiring harnesses we stock for the 2016–2023 Toyota Tacoma. Pair any with a head unit below — it’s plug-and-play, no cutting.
Dash Kits (turns the dash opening into a single/double-DIN slot)
Wiring Harnesses (plug-and-play — no soldering)
Now pick your upgrade
Apple CarPlay / Android Auto receivers that drop into the dash kit above.
Shop head units →Upgrade the factory speakers while the door panels are off — biggest sound-per-dollar.
Shop speakers →Add real low-end. We’ll point you to a sub + amp that fits the Toyota Tacoma.
Shop bass →Don’t want to DIY? We install it.
Order the kit online, or have our certified techs install your Toyota Tacoma stereo, speakers or sound system at our Chilliwack shop. Drivers come in from across the Fraser Valley & Greater Vancouver.
2016–2023 Toyota Tacoma stereo upgrade — FAQ
What size speakers fit a 2016–2023 Toyota Tacoma?
On most 3rd-gen Tacomas the front doors take 6×9" speakers and the Double Cab rear doors take 6.5". Access Cab trucks don't have true rear doors — they use smaller fill speakers behind the seats — and some front doors need a 6.5" mounting adapter. JBL/Entune Premium trucks also have dash tweeters. Tell us your cab and trim and we'll match the exact size.
Can I put a double DIN / Apple CarPlay stereo in my Tacoma?
Yes. With the Metra 99-8251B (or 95-8235CHG) dash kit, a 2016–2023 Tacoma takes a full double-DIN Apple CarPlay / Android Auto receiver cleanly in place of the factory Entune screen. Prefer a smaller deck? The 99-8235B and 99-8235CHG kits handle a single-DIN stereo.
Will I lose my steering-wheel controls or backup camera?
No. A plug-and-play harness keeps your steering-wheel controls working and a compatible head unit retains the factory backup camera. The iDatalink HRN-HRR-TO2 Maestro T-harness is the cleanest option on JBL/Entune Premium trucks — it retains the steering-wheel controls, camera and the factory amp when paired with a Maestro-ready deck.
What dash kit do I need for a 3rd generation Tacoma?
For a double-DIN stereo the Metra 99-8251B (single/double DIN, '16-up) is the go-to, with the 95-8235CHG as a charcoal double-DIN alternative. For a single-DIN stereo use the 99-8235B (matte black) or 99-8235CHG (high-gloss charcoal). All four are in stock above with live pricing.
Can Audiomotivez install it for me?
Absolutely. We install Toyota Tacomas at our Chilliwack shop, with customers driving in from across the Fraser Valley — Abbotsford, Mission, Langley and Greater Vancouver. Order the kit online for a DIY install, or book a professional install — call 604-792-4070.