EDGE EDBX12D2-E3: DBX Series 12" 1000W RMS Dual 2 Ohm Subwoofer

The EDGE EDBX12D2-E3 is a 12 inch subwoofer from the DBX Series, rated at 1000 watts RMS and 2000 watts peak with a dual 2 ohm impedance. Its motor pairs a 100 oz double-stacked Y35 ferrite magnet with a 2.5 inch voice coil on a black aluminium former, mounted in a pressed steel torsion basket. The non-pressed paper cone uses a stitched wide-roll foam surround and EDGE's two-piece dust cap, which the maker says stiffens the cone. EDGE quotes a 25Hz to 850Hz frequency response, a 6.7 inch (170mm) mounting depth and an enclosure volume of 1.5 to 2.5 cubic feet.

Specifications
• Series: DBX Series
• Type: Subwoofer
• Size: 12"
• RMS Power: 1000 W
• Peak Power: 2000 W
• Impedance: Dual 2 Ohm
• Voice Coil: 2.5" black aluminium former
• Frequency Response: 25Hz - 850Hz
• SPL: 84 dB
• Magnet: 100 oz dual stacked Y35 ferrite
• Cone: Non pressed paper
• Surround: Big roll foam, stitched
• Mounting Depth: 6.7" (170mm)
• Enclosure Volume: 1.5 - 2.5 ft3
• Basket: Pressed steel torsion basket
• Dust Cap: Custom tooled IMPP, two piece
• Spider: 1 layer black PC
• Top Plate: 10mm black anodised
• T-Yoke: 10mm black anodised, flat
• Gasket: Rubber
• Terminals: Spring loaded connectors
• Fs: 34Hz
• Qts: 0.625
• Qes: 0.715
• Qms: 4.96
• Vas: 24.7L
• Mms: 272.2g
• Cms: 78.4 μM/N
• BL: 17.2 T
• Le: 2.2 mH
• Sd: 471 cm2
• Re: 2 x 1.8 Ohm
• Sold As: Single